Battery plant logistics automation is the equipment family that links, without operators, raw material receiving, electrode roll transfer, tray transport between processes, formation rack storage and retrieval, and finished cell shipping. The basis for comparing makers is not fleet size or software features but stopping distance and the tipping and sliding margins when carrying heavy rolls and trays. This article groups 21 logistics automation makers verified from public sources by equipment type, and checks by calculation the stopping conditions of an electrode roll AGV.
Problem Definition
Battery plant logistics handles two kinds of loads. Jumbo rolls in the electrode process are heavy and have a high center of gravity. Trays in assembly and formation are light, but thousands of them circulate without pause. Makers push travel speed and fleet size to raise throughput.
Deceleration is the contradiction. Stopping distance grows with the square of speed. Raising deceleration to shorten it reduces the load’s tipping and sliding margins. So what should be asked first when comparing logistics makers? Our answer: calculations of stopping distance, tipping and sliding at maximum speed and emergency deceleration.
Kinematic Analysis — Issues by Equipment Type
| Equipment type | Governing mechanical variable | Typical risk | Makers |
|---|---|---|---|
| AS/RS and stacker cranes | Mast deflection and sway, travel and hoist acceleration | Fork position error, rack collision | Lanjian, Jingsong, Jungheinrich, TGW, KION (Dematic), Miracom I&C, SFA |
| AGVs and driverless forklifts (pallets, rolls) | Center of gravity height, deceleration, load securing | Tipping, load sliding, insufficient stopping distance | Kunchuan, SIASUN, Guozi, Grenzebach, JBT, Seegrid, Vecna, Robostar |
| AMRs and warehouse robots (totes, racks) | Localization accuracy, multi-robot scheduling | Deadlock, accumulated position error | Hikrobot, Quicktron, Geek+, HAI ROBOTICS, Locus, LS Tirayutec |
| Overhead hoist transport (OHT) | Rail deflection, hoist sway | Dropped loads, stop position error | Miracom I&C |
Many warehouse robot makers focus on e-commerce and retail logistics, and some have no battery plant references in public sources. In those cases, roll and tray load conditions and cleanroom or explosion-proof requirements need separate confirmation.
Maker Comparison Table
The table lists only what is disclosed on official websites, in filings, in company press releases, or in press and broker reports. Third-party revenue estimates were excluded. Makers that could not be cross-checked against public primary sources were left out.
| Maker | HQ | Main business | Disclosed facts | Basis |
|---|---|---|---|---|
| SFA Engineering | Korea | Battery process logistics turnkey, AS/RS | Over 35 years in business, over 1,600 logistics systems delivered. Expanding from Korea’s three cell makers to European and American customers | Company website |
| Miracom I&C | Korea | OHT, stacker crane AS/RS, MCS | Extends semiconductor OHT experience to battery logistics. Integrated transport control with Nexplant MCS | Company website |
| LS Tirayutec | Korea | Smart factory MES, logistics robots | KOSDAQ listed (2019). LS Electric became the largest shareholder in 2024. AMRs through subsidiary Tira Robotics | Company filings |
| Robostar | Ansan, Korea | Industrial robots, AGVs and AMRs | KOSDAQ listed (2011), LG Electronics affiliate. Expanding mobile robots for batteries and semiconductors | Company filings |
| Lanjian Intelligent | Jinan, China | Stacker crane and shuttle AS/RS | STAR 688557. Founded 1993. In-house design, production and installation of a 45 m high-bay warehouse | Listing disclosure |
| Kunchuan Intelligent | Kunming, China | Laser-guided AGVs, logistics systems | Shenzhen 301311, China State Shipbuilding group. Produced China’s first laser-guided AGV with NDC technology in 1996 | Listing disclosure |
| SIASUN | Shenyang, China | Robots, logistics automation, AGVs | ChiNext 300024, founded 2000 on technology from the CAS Shenyang Institute of Automation. Supplies intelligent lines for lithium batteries | Company filings |
| Hikrobot | Hangzhou, China | AGVs and AMRs, machine vision | Spun off from Hikvision in 2016. 19.88% share of China’s mobile robot market in 2021 (broker report) | Broker report |
| Quicktron | Shanghai, China | Warehouse mobile robots | Founded 2014. New energy industry share of AGV sales forecast to exceed 25% (press citing GGII) | Industry press |
| Geek+ | Beijing, China | Warehouse AMRs | Listed in Hong Kong in 2025-07. Schedules over 5,000 units at once in a single warehouse (company statement) | Listing disclosure |
| HAI ROBOTICS | Shenzhen, China | Tote-handling warehouse robots (HAIPICK) | Founded 2016. Pick and place accuracy ±3 mm (company figure). Pursuing a Hong Kong listing | Company website |
| Guozi Robotics | Hangzhou, China | Forklift robots, inspection robots | Founded 2011. Raised over CNY 200 million in strategic funding in 2024-01 | Public reports |
| Jingsong Intelligent | Suzhou, China | Narrow-aisle AGVs, stacker cranes | Founded 2007. In-house single and double mast stackers and AGVS scheduling | Company website |
| KION Group | Frankfurt, Germany | Forklifts, Dematic automation | Spun off from Linde’s material handling business in 2006. Acquired Dematic for EUR 1.9 billion in 2016 | Public financials |
| Jungheinrich | Hamburg, Germany | Forklifts, stacker cranes, logistics systems | Founded 1953; over 20,000 employees (2024-12) | Company public data |
| TGW Logistics | Marchtrenk, Austria | Automated warehouse system integration | Founded 1969. FY2024/25 revenue EUR 1.07 billion, 4,600 employees | Company public data |
| Grenzebach | Bavaria, Germany | Omnidirectional AGVs, intralogistics | Family company founded 1960. Applies DIN EN 1175 to AGV electrical design | Company website |
| JBT | Chicago, USA | AGV systems | NYSE JBTM. Designed a wire-guided AGV in 1981; 3D camera pallet detection (2017) | Company public data |
| Seegrid | Pittsburgh area, USA | Vision-based driverless pallet transport | Founded 2003. Palion AMRs, Lift CR1 lift truck | Company website |
| Vecna Robotics | Waltham, USA | Autonomous forklifts and tuggers | Spun off in 2018. Autonomous counterbalanced forklifts and tuggers | Company website |
| Locus Robotics | Wilmington, USA | Collaborative warehouse AMRs | Founded 2014. Over 5 billion picks (company announcement) | Company announcement |
Korean makers — process logistics turnkey and semiconductor experience
SFA extended its display and semiconductor logistics experience to turnkey logistics for the whole battery process. Miracom I&C applies semiconductor OHT and stacker crane AS/RS to battery lines. LS Tirayutec and Robostar came to AMRs from MES and robot backgrounds. The strength of Korean makers is interface experience with cell process equipment.
Chinese makers — scale in AS/RS and mobile robots
Lanjian discloses a 45 m high-bay warehouse it built itself. Kunchuan produced China’s first laser-guided AGV in 1996. Hikrobot and Quicktron are raising the share of mobile robots sold to lithium battery and solar plants. Geek+ and HAI ROBOTICS focus on warehouse picking robots, and their use in battery plants needs separate confirmation.
European and US makers — intralogistics standards
KION (Dematic), Jungheinrich and TGW are large AS/RS integrators. Grenzebach supplies omnidirectional AGVs, and JBT, Seegrid and Vecna supply driverless forklifts and pallet transport. Locus focuses on picking AMRs that work alongside people.
Calculation and Formula Check — Stopping Conditions of an Electrode Roll AGV
Consider an AGV carrying a jumbo electrode roll that stops after detection. Stopping distance is travel during reaction time plus braking distance.
$$s = v\, t_r + \frac{v^{2}}{2a}, \qquad a_{tip} = \frac{g\, b}{h}, \qquad a_{slip} = \mu g$$
$s$ is stopping distance (m), $v$ is travel speed (m/s), $t_r$ is detection and brake reaction time (s), $a$ is deceleration (m/s²), $a_{tip}$ is the deceleration at which tipping begins (m/s²), $b$ is the horizontal distance from the center of gravity to the tipping wheel contact (mm), $h$ is the combined center of gravity height (mm), $a_{slip}$ is the deceleration at which the roll begins to slide on its cradle (m/s²) and $\mu$ is the friction coefficient between roll and cradle.
The safety factor is checked twice.
$$SF_1 = \frac{L_f}{s} \ge 2, \qquad SF_2 = \frac{a_{tip}}{a} \ge 2$$
$L_f$ is the safety scanner protective field length (mm). Example conditions: t_r=0.2 s, L_f=2,000 mm, h=1,200 mm, b=500 mm, giving a_tip=4.09 m/s². All are example values; re-confirm after on-site measurement.
| Case | v (m/s) | a (m/s²) | Stopping distance s (mm) | SF1 | SF2 | Result |
|---|---|---|---|---|---|---|
| A service braking | 1.0 | 0.5 | 1,200 | 1.67 | 8.2 | Stopping distance short |
| B emergency braking | 1.0 | 2.0 | 450 | 4.4 | 2.0 | Borderline |
| C high-speed service braking | 1.5 | 0.5 | 2,550 | 0.78 | 8.2 | Fail |
| D high-speed emergency braking | 1.5 | 2.0 | 863 | 2.3 | 2.0 | Borderline |
Raising speed from 1.0 to 1.5 m/s more than doubles the service-braking stopping distance, from 1,200 mm to 2,550 mm. Higher deceleration shortens the distance but cuts the tipping margin to 2.0. Stopping distance and tipping margin move in opposite directions with deceleration. Sliding must also be checked. With a roll-to-cradle friction coefficient of 0.2 (example), a_slip=1.96 m/s², so an unsecured roll slides at the 2.0 m/s² emergency deceleration. That is why emergency deceleration should not be set without a roll clamp.
Practical Application (Shop-notes)
- When comparing quotations, ask for maximum speed, service and emergency deceleration, protective field length, loaded center of gravity height and roll securing method together. Check driverless industrial truck safety requirements against ISO 3691-4.
- Split speed zones. Keep low speed at intersections and where people walk, allow higher speed in dedicated aisles, and switch the protective field length by zone to secure both throughput and SF1.
- Machinability: shape the roll cradle as a V-block covering the roll diameter range, with a resin liner on the contact faces to protect the roll core. Bolt the liner so it is easy to replace.
- Alternative mechanism — loading the roll upright (core axis vertical) to lower the center of gravity. Not adopted because the roll end face rests on the cradle, raising the risk of electrode edge damage, and the orientation does not match how process machines mount rolls, so an extra turning device would be needed.
- For stacker cranes, include the mast sway settling time after travel acceleration in the cycle calculation.
Design Checklist
- Compare stopping distance with the protective field for each speed and deceleration case; confirm SF1 of 2 or more
- Confirm SF2 of 2 or more against the tipping deceleration
- Confirm roll and tray sliding limits and whether clamps are fitted
- Confirm speed limits in pedestrian zones and the protective field switching logic
- Confirm battery plant references and cleanroom or explosion-proof capability
- Confirm that stacker crane mast sway settling time is included in the cycle
One-line Summary
Logistics automation should be compared on the stopping, tipping and sliding margins of a loaded roll, not on fleet size and speed.