Battery assembly equipment combines the winding, stacking, tab welding and packaging machines that turn electrodes into cells, and the welding and fastening machines that turn cells into modules and packs. The basis for comparing makers is not the speed figure but the structure that lets the frame absorb the inertial load added by higher speed. This article splits 16 assembly equipment makers verified from public sources into cell assembly and module/pack assembly, and checks by calculation the stiffness that a shorter stacking cycle demands.
Problem Definition
Cell assembly competes on cycle time. Stackers quote time per sheet and winders quote spindle speed. Module and pack assembly compete on laser weld quality and fastening traceability.
The contradiction lies in acceleration. Moving the same stroke in half the time quadruples acceleration. Four times the inertial force means more frame vibration and alignment error, and alignment error becomes electrode overhang defects. So what should be asked first when a maker leads with speed? Our answer: the peak inertial force at the target cycle and the frame stiffness calculation.
Kinematic Analysis — Cell Assembly and Module/Pack Assembly
| Process | Governing mechanical variable | Typical risk | Makers |
|---|---|---|---|
| Stacking (Z-stacking) | Reciprocating acceleration of the stacking table, separator tension | Electrode misalignment, separator wrinkles | Woowon Technology, DA Technology, Geesun |
| Winding | Mandrel inertia, tension change as diameter grows | Jelly-roll telescoping, tab position error | KOEM, Geesun |
| Cell back-end (packaging, filling, inspection) | Fixture repeatability, sealing structure | Fill volume variation, leaks | Utimes, Hana Technology |
| Module/pack laser welding | Weld head mount stiffness, dissimilar metal welding conditions | Penetration depth variation, spatter | UW Laser, Han’s Laser, Photon Automation |
| Module/pack integration | Robot repeatability, fastening torque history | Missed fastening, broken traceability | KUKA, Liebherr, Jonas & Redmann, GROB, JR Automation, Universal Instruments, ABS |
European makers split roles. A published arrangement has Jonas & Redmann handling module and package assembly and Liebherr handling module-to-pack assembly and general contracting. In that case the comparison is not a single maker but the interface responsibility document between makers.
Maker Comparison Table
The table lists only what is disclosed on official websites, in filings, in company press releases or in press reports. Third-party revenue estimates were excluded. Makers with a detailed profile are linked.
| Maker | HQ | Main process | Disclosed facts | Basis |
|---|---|---|---|---|
| Hana Technology | Korea | Assembly, formation and pack turnkey | KOSDAQ listed. UK turnkey contract of KRW 161.5 billion (172.09% of 2025 revenue) | Bloter, Digital Daily |
| Woowon Technology | Korea | Z-stacking | Stacking specialist preparing for listing | Press reports |
| KOEM | Korea | Cylindrical winding | Unlisted cylindrical jelly-roll winding specialist. Reported supply of winders for Tesla 46800 cells | THE ELEC |
| DA Technology | Korea | Notching, Z-stacking, winding, tab welding | KOSDAQ 196490 (suspended). 2023 revenue about KRW 88 billion, operating loss KRW 44.4 billion. Rehabilitation opened 2024-04; M&A in progress | Public reports |
| Geesun | Shenzhen, China | Winding, stacking | About 800 patents (per company chairman) | Sina Finance interview |
| Utimes (Yuchen) | Shenzhen, China | Cell back-end (wrapping film, filling, helium leak test, can insertion) | STAR 688638, founded 2012, listed 2023 | Company disclosures |
| UW Laser | Shenzhen, China | Module/PACK laser welding | STAR 688518. In-house weld heads from 5 to 6,000 W and 266 to 2,000 nm. About 1,680 customers (company statement) | Company website |
| Han’s Laser | Shenzhen, China | Power battery module welding | Shenzhen 002008, founded 1996. Subsidiary Jiangsu Han’s Intelligent Welding Equipment Group | Company disclosures |
| KUKA | Augsburg, Germany | Robot-based module assembly | Founded 1898, part of Midea Group. 2025 revenue EUR 3.9 billion, 14,542 employees | Company public data |
| Liebherr-Verzahntechnik | Germany | Pack assembly automation, general contracting | Co-developed automated high-voltage module connector assembly with KUKA and KOSTAL | Customer magazine |
| Jonas & Redmann | Berlin, Germany | Cell and module handling and assembly | Founded 1989, about 450 employees (2024-11) | Company website |
| GROB-WERKE | Mindelheim, Germany | Prismatic and cylindrical module assembly | Family company founded 1926. Co-developed a cell concept factory with Dürr | Battery-Tech Network, Charged EVs |
| JR Automation | Holland, USA | Module/pack automation integration | Founded 1980. Acquired by Hitachi in 2019 for about USD 1.425 billion. About 2,000 employees | Public data |
| Photon Automation | Farmington Hills, USA | Module/pack laser welding | Patented dynamic power adjustment for dissimilar metal welds. Set up subsidiary Photon Energy in 2025-08 | Company website |
| Universal Instruments | New York, USA | Precision automation, electronics assembly | Started 1919; acquired by Delta Electronics in 2022-07. Over 27,000 systems shipped | Company website |
| American Battery Solutions | Michigan, USA | Module and pack manufacturing | Dedicated manufacturing site in Ohio of about 170,000 ft² | Company profile |
Korean makers — localizing cell assembly, and financial risk
Hana Technology won a KRW 161.5 billion UK contract with a turnkey package covering assembly, formation and pack. Woowon Technology and DA Technology focus on Z-stacking. DA Technology entered rehabilitation in April 2024 after a KRW 44.4 billion operating loss in 2023. Assembly equipment is highly customized for each cell maker, so a failure of cost control turns directly into losses. For buyers, supplier financial condition decides spare parts and retrofit support.
Chinese makers — in-house laser welding
UW Laser and Han’s Laser develop their own laser sources and weld heads and supply them up to module/PACK welding lines. Utimes covers cell back-end steps such as wrapping film, electrolyte filling, helium leak testing and can insertion. Makers with in-house lasers bundle weld parameter data with the machine specification, so the contract should state whether weld quality responsibility stays with the equipment maker.
European and US makers — integration and role sharing
KUKA supplies robots, Liebherr general-contracts pack lines, and Jonas & Redmann handles cell transfer and assembly. GROB co-developed with Dürr a cell factory concept that combines wet and dry coating with a Z-folder. JR Automation, a Hitachi company, promotes closed-loop automation that verifies weld depth, dispensing volume and fastening torque inline. They have carried the traceability practice of automotive assembly lines over to battery packs.
Calculation and Formula Check — Shorter Stacking Cycle and Inertial Force
The reciprocating motion of the Z-stacking table is assumed to follow a cycloidal profile. A cycloidal profile has zero acceleration at start and end, which keeps shock low, so it is used for fast reciprocation.
$$a_{max} = \frac{2 \pi s}{1000\, t^{2}}, \qquad F = m\, a_{max}$$
$a_{max}$ is peak acceleration (m/s²), $s$ is stroke (mm), $t$ is move time (s), $m$ is moving mass (kg) and $F$ is peak inertial force (N). Example conditions: s=300 mm, m=40 kg. All are example values; re-confirm after on-site measurement.
The safety factor is checked twice. SF1 is based on the linear guide static load rating, SF2 on positional accuracy.
$$SF_1 = \frac{C_0}{F} \ge 2, \qquad SF_2 = \frac{k\, \delta_a}{F} \ge 2$$
$C_0$ is the total static load rating of the guides (N), $k$ is the stiffness of the frame and guide system in the direction of motion (N/mm), and $\delta_a$ is the allowable displacement allocated to frame deformation from the alignment tolerance (mm). Here δa=0.1 mm (example value).
| Item | t=0.25 s | t=0.125 s | Ratio |
|---|---|---|---|
| Peak acceleration a_max (m/s²) | 30.2 | 120.6 | 4x |
| Peak inertial force F (N) | 1,206 | 4,825 | 4x |
| Required static rating C0 (N, SF1=2) | 2,413 | 9,651 | 4x |
| Required stiffness k (N/mm, SF2=2) | 24,100 | 96,500 | 4x |
Halving the move time quadruples the inertial force, the required static rating and the required stiffness. Twice the cycle speed demands four times the frame stiffness. The static rating can be met with larger guide blocks. But four times the frame stiffness means four times the second moment of area, and frame weight and footprint grow with it. Choosing a machine on the speed figure alone means buying misalignment.
Practical Application (Shop-notes)
- When comparing quotations, ask for the motion profile at the target cycle, the moving mass, the peak inertial force and the frame stiffness calculation. Do not rank a maker that quotes only speed in the same class.
- Machinability: machine the guide mounting faces of a welded frame after stress-relief heat treatment so that mounting face flatness holds. Machining before heat treatment causes distortion and rework.
- Reducing moving mass works better than adding stiffness. Inertial force is proportional to mass, so a 25% lighter moving section equals a 25% lower stiffness requirement. Aluminum has a specific stiffness close to steel and helps cut mass, but guide seat wear and bolted joint deformation must be checked separately.
- Alternative mechanism — a counterbalance (a body moving in opposite phase) can cancel the frame reaction. Not adopted because the moving mass doubles, increasing drive power and guide load and taking more space. Lighten the moving section and secure frame stiffness first.
- For module/pack laser welding, add the separation between weld head mount natural frequency and scanner drive frequency to the FAT items.
Design Checklist
- Confirm the motion profile and peak acceleration at the target cycle
- Confirm SF1 of 2 or more on the guide static load rating
- Confirm SF2 of 2 or more on frame stiffness and the basis of the displacement allocation
- Review ways to cut moving mass (material and shape)
- Confirm the natural frequency of the laser weld head mount
- Confirm supplier financial condition and continuity of spare parts and retrofit support
One-line Summary
Assembly equipment should be compared on the inertial force and frame stiffness its cycle demands, not on the cycle figure.